Page 1 of 1

Bulgin Touch switches

PostPosted: July 14th, 2018, 10:31 am
by poseidonsvoice
Ti,

I’m curious to see if there’s compatibility using the epsilon 24 power switch drivers circuit with Bulgin touch sensitive switches (capacitive and piezo).

https://www.bulgin.com/media/bulgin/dat ... itches.pdf

https://www.bulgin.com/media/bulgin/data/Piezo.pdf

I’ve looked at the pdf’s and it appears the piezo type requires a 24V supply while the capacitive version may not be compatible either as I cannot find a pin diagram for the wiring.

Thanks!

Anand.

Re: Bulgin Touch switches

PostPosted: July 14th, 2018, 1:13 pm
by amb
The ε24 expects a simple mechanical momentary switch. Capacitive or piezo types won’t work.