Page 1 of 1

Right channel distortion

PostPosted: May 17th, 2019, 4:09 pm
by Fred76
Hello

After many, many years of great enjoyment, my γ2 now has some distortion in the right channel.
It manifests most with bass.
Sometimes, when changing the filter setting and back, the problem completely disappears and doesn't come back for days.

WM8741 gone bad?

Thanks for any help,
Fred

Re: Right channel distortion

PostPosted: May 17th, 2019, 8:35 pm
by amb
It sounds like a mechanical/physical issue. Maybe a solder joint is not wholesome, or a bad contact in the board connectors. Try reflowing solder joints first. Also, make sure your interconnect cables are in good condition and making good contact with the jacks.

Re: Right channel distortion

PostPosted: May 24th, 2019, 1:32 pm
by Fred76
Indeed, one of the γ1 to γ2 mating pins became loose.

Thanks Ti.