AMB Laboratories DIY Audio

by **grahamfocal** » February 3rd, 2012, 6:04 am

MisterX wrote:What's the resistance between the 3.3 test point and ground?

powered or unpowered its the same, as per the basic checks, should it have a reading powered?

by **amb** » February 3rd, 2012, 9:27 am

Resistance should always be measured with power OFF.

by **grahamfocal** » February 3rd, 2012, 9:51 am

amb wrote:Resistance should always be measured with power OFF.

Well, you were right, it was the voltage reg. all working fine now (fingers crossed) thanks again for help.
now time to go and listen

by **grahamfocal** » February 3rd, 2012, 9:52 am

MisterX wrote:What's the resistance between the 3.3 test point and ground?

thanks for your help, all working now, see above post.

y1-Y2 no output