Post pics of your builds....
Post pics of your builds....
by Tedro » April 7th, 2010, 12:48 pm
Let see your completed projects or what your working on!
...and it has an 18 gigamatrix omni buffer with quad bypass resistace core. I think Im gonna try to overclock the terminal vector capacitor
- Tedro
- Posts: 4
- Joined: April 7th, 2010, 9:29 am
- Country:
Re: Post pics of your builds....
by Billyk » April 7th, 2010, 5:55 pm
CK2III in the works
A "grub" DAC that I am mounting inside the CK2III
Back:
Front with DAC chips:
A "grub" DAC that I am mounting inside the CK2III
Back:
Front with DAC chips:
-
Billyk - Posts: 109
- Joined: April 4th, 2010, 11:09 am
- Location: North Central MA
- Country:
Re: Post pics of your builds....
by MisterX » April 8th, 2010, 2:47 am
A cheap case from eBay was not the best idea for an M3.
1352.5 and counting.
-
MisterX - Posts: 799
- Joined: March 31st, 2010, 2:00 am
- Location: Kalamazoo, MI
- Country:
Re: Post pics of your builds....
by komi » April 8th, 2010, 3:38 am
My new faceplate for preamplifier !
Brasislien Walnut ordered from eBay, Cut on size, laser engraved, infilled with gold paint, drilled and carved, will be done in couple working ways !
Black semi transparent Plexy will be iluminated on edges with blue LEDs under knobs [if you wonder what are this 4 holes in exposed Plexy where Knobs will be mounter on shafts] ...
Brasislien Walnut ordered from eBay, Cut on size, laser engraved, infilled with gold paint, drilled and carved, will be done in couple working ways !
Black semi transparent Plexy will be iluminated on edges with blue LEDs under knobs [if you wonder what are this 4 holes in exposed Plexy where Knobs will be mounter on shafts] ...
- komi
- Posts: 117
- Joined: March 31st, 2010, 6:42 am
- Country:
Re: Post pics of your builds....
by Stixx » April 8th, 2010, 3:47 am
M3 built in 2007
OPA627 opamps (not in picture!), TKD pot, gentle switchable bassboost, custom case
Design in Illustrator
OPA627 opamps (not in picture!), TKD pot, gentle switchable bassboost, custom case
Design in Illustrator
- Stixx
- Posts: 3
- Joined: April 8th, 2010, 3:36 am
- Country:
Re: Post pics of your builds....
by BlackGate » April 8th, 2010, 8:12 am
Currently working on a Harman Kardon HK250 (PP 6L6 outputs) and in the early stages of a Millet MOSFET MAX:
You do not have the required permissions to view the files attached to this post.
- BlackGate
- Posts: 11
- Joined: April 7th, 2010, 8:17 am
- Country:
Re: Post pics of your builds....
by millst » April 8th, 2010, 12:01 pm
B22 build almost complete. S22 in seperate chassis. Just have to wire everything up.
Chassis' are custom machined and consist of 1/4" aluminum plate for top,sides,bottom, and rear panel. Front panel is 3/8" aluminum plate.
Chassis' are custom machined and consist of 1/4" aluminum plate for top,sides,bottom, and rear panel. Front panel is 3/8" aluminum plate.
You do not have the required permissions to view the files attached to this post.
- millst
- Posts: 24
- Joined: April 1st, 2010, 12:19 pm
- Country:
Re: Post pics of your builds....
by millst » April 8th, 2010, 12:05 pm
Picture of the S22 power supply chassis. Same size and build as the pre chassis.
You do not have the required permissions to view the files attached to this post.
- millst
- Posts: 24
- Joined: April 1st, 2010, 12:19 pm
- Country:
Re: Post pics of your builds....
by millst » April 8th, 2010, 12:08 pm
Front panel milling for the input and level knobs. I am using Cary Audio black lacquer knobs.
You do not have the required permissions to view the files attached to this post.
- millst
- Posts: 24
- Joined: April 1st, 2010, 12:19 pm
- Country:
Re: Post pics of your builds....
by millst » April 8th, 2010, 12:09 pm
Rear panel of power supply with custom AC cord.
You do not have the required permissions to view the files attached to this post.
- millst
- Posts: 24
- Joined: April 1st, 2010, 12:19 pm
- Country:
Return to General DIY discussions
Who is online
Users browsing this forum: No registered users and 0 guests
